Construction & Installation
Showing 169–192 of 870 results
-
PPC Right angle adapter, extended, pin to pin length 2.1″ (5.33 cm)
-
PPC Right angle adapter, extended, pin to pin length 1.5″ (3.81 cm)
C121.8 | Telstra Serial 73900092 | Optus Serial 6017
-
Runpotec Fiberglass Rod 6mm x 80m (6mm thread), Standard Cage (530mm)
K.R10066
-
RIPLEY RTF-716-3.4L Torque Tool 30 in-lbs, 7/16″ for F Connector, Long (310mm)
C.RTF-716N-3.4L
-
PPC CableReady Duct Entry Key 1″ Enter 3/4″ 1″ 2″ Molding
H.XEK050HD
-
Runpotec Stainless Steel Cable Pull Grip, 1120mm long w. Loop, Swivel & 6mm/12mm Thread for 50-60 mm cable
K.R20438
-
C-COR EQ FWD 1.2GHz, Fwd Path Equaliser 5dB
FEQ1.2G-5dB
-
PPC PPQR320 0.320″ Connector
C.PP320QR
-
PPC 90 Deg Swivel Adapter
C.CP903SW | Optus Serial 6016
-
RIPLEY Cable Assist Grip – Rubber
C.CAG
-
RIPLEY Guide Sleeve for C163.2 (CST 500 Coring & Stripping Tool for 0.50″ Cable)
C160.4 | Telstra Serial 74000069
-
PPC Splice block, In-line
C151.1 | Telstra Serial 73900121
-
Runpotec Eyelet 8mm, 6mm thread
K.R30208
-
NPB pad 7 dB attenuator
A67.5 – 7DB | Telstra Serial 73700451 | Optus Serial A67.5 – 7DB
-
NPB pad 5 dB attenuator
A67.5 – 5DB | Telstra Serial 73700449 | Optus Serial A67.5 – 5DB
-
NPB pad 4 dB attenuator
A67.5 – 4DB | Telstra Serial 73700448 | Optus Serial A67.5 – 4DB
-
NPB pad 11 dB attenuator
A67.5 – 11DB | Telstra Serial 73700455 | Optus Serial A67.5 – 11DB
-
NPB pad 10 dB attenuator
A67.5 – 10DB | Telstra Serial 73700454 | Optus Serial A67.5 – 10DB
-
Internal Directional Coupler (SDC 1000-8)
A63.3 – 8
-
Runpotec Stainless Steel Cable Pull Grip, 270mm long with Loop & Swivel, for 4-6 mm cable
K.R30039
-
Runpotec Runposticks – Standard Set, 17 piece (6mm thread), Basalt Rods, including bag
K.R10016
-
Runpotec XBoard Cable Roller XB300 – Load Bearing Capacity 300kg
K.R10137
-
Eagle 65/85MHz Diplex Filter 1.5GHz Low Band 75 Ohm, F Connector
L.E65/85DPF
-
RIPLEY QCST 750T Without Ratchet, No Strip Stop, Green, For 0.75″ P3 T10 Cable
C160.7.NS